Reverse Pulse Jet Pleated Filter

Reverse Pulse Jet Pleated Filter Dust Collector is a system of dust collector which is generally utilized in industries or factories. A high-pressure blasting of air is done to eliminate dust from the Pleated Filter bag dust collector. The blasting air enters the top of the Pleated Filter bag tube, temporarily stopping the flow of dirty air. The immediate collapse of air causes a wave of expansion to travel down the pleated filter bag. The flexing of the bag shatters and releases or breaks the dust block present over the pleated filter. The airburst is approximately 0.1 second and it takes about 0.4999 seconds for the wave to travel down the length of the filter bag. Due to its very fast release, the blast of air makes not interfere with the contaminated gas flow. Hence, Reverse Pulse Jet Pleated Filter Dust Collector can work continuously and are not normally compartmentalized. The blast of compressed air needs to be powerful enough to assure that the wave will travel the entire length of the filter bag and break the dust cake. The efficiency of the cleaning system permits the unit to should a much higher gas than shaking and reverse air bag filters.

The cleaning system consists of a sequential time controller. This sequential timer controls the solenoid valves. This compressed-air momentary enters or pulse of high-pressure compressed air through the blowpipe into the filter tube. This pulse of air generates a reverse flow of air, which expands the filter cartridges to clean or remove the collected dust over the filter.